Applications
Applications
Pick your kind of project — we match MV, LV, control and fire-safety cables into one checked cable schedule.
Utilities & substationsMV and HV XLPE cables for distribution networks and substations.
Commercial buildingsLV, LSZH and fire-resistant cables for offices, malls and hospitals.
Industrial plantsArmoured power, control and instrumentation cables for heavy industry.
Wind & solar farmsMV collector cables, LV and earthing cables for renewable plants.
Overhead lines & rural powerACSR, AAAC and aerial bundled cable for transmission and distribution.
Tunnels, metro & data centresFire-resistant and halogen-free cables for critical infrastructure.Request a quote
What you actually get
Every inquiry is answered by an engineer, not a sales script.
Send loads or a cable list. We return sizes, ratings, voltage drop and drum plan.
Get a quoteEvery drum is metered on the line; the packing list shows the real length.
Get a quoteTest reports, declarations and certificate copies for consultants, utilities and customs.
Get a quoteDrum lengths per section and pulling direction marked — fewer joints, less waste.
Get a quoteFAQ
Questions buyers ask
Short answers from our engineers. Ask anything else in the inquiry form.
What voltage range do you manufacture?
From 300/500 V instrumentation cable and 450/750 V building wire through 0.6/1 kV LV cables and 3.6/6 to 26/35 kV medium-voltage XLPE cables up to 64/110 and 76/132 kV high-voltage cables, plus bare overhead conductors for lines up to 500 kV.
Copper or aluminium conductor — which should I choose?
Copper is smaller and easier to terminate; aluminium needs about 1.6 times the cross-section but costs and weighs much less. For feeders of 95 mm² and above, aluminium often lowers the total cost. Our calculator shows both.
Which standards can you produce to?
IEC (60502-1/-2, 60840, 60228, 61089, 60331), BS (5467, 6724, 7846, 5308, 215), EN (50525, 50182, 50288), NF C 33-209, UL 83 and Chinese GB/T standards. Tell us the standard on your tender; we build to it.
What is the minimum order and lead time?
Standard LV cables and building wire start from one drum or one pallet of coils. MV cables are usually made from about 1 km per size. Typical lead time is 2–4 weeks for LV and 4–6 weeks for MV; we confirm a firm date with every quotation.
Which documents come with the cables?
Routine test reports per drum, a packing list with drum numbers and lengths, the declaration of conformity to the specified standard and type-test certificate copies. Third-party inspection (SGS, BV, Intertek) before shipment is welcome.
How are cables packed for export?
On wooden or steel drums sized to the cable, with sealed ends, wooden lagging or protective film and shipping marks per your instructions; small sizes in coils on pallets. Drum lengths are planned to your route sections to reduce joints.
Send us your cable schedule.
Types, sizes, lengths and destination are enough. An engineer replies with a checked selection, drum plan and quotation within one working day.
